i@anchor Parts
The New Standard in Anchor Control
Drop.
Watch.
Know.
The TMQ i@nchor puts your anchor on instruments. Exact rode count at the helm, automatic deployment to a preset length, and a depth-linked auto-scope no chain counter at this level can match. Australian designed and built in Brisbane since 1974.
TMQ i@nchor Series
12/24 V DC · NMEA 2000
Fits most windlasses
Why i@nchor
Eliminate the guesswork
Every metre of rode, counted from a sensor on your gypsy and displayed at the helm. No more counting cable ties in the dark. No more short scope dragging you onto your neighbour at 2AM.
Depth-Linked Auto-Scope
The headline act. i@nchor reads live depth from your NMEA 2000 sounder, multiplies it by your chosen scope, and sets the deploy length automatically. Anchor to the conditions — every single time.
Set & Forget Auto Mode
Dial in a desired length, press and release. i@nchor runs the windlass out or back to the mark hands-free, showing length, target and rate the whole way.
Bright Colour Display
A real colour LCD with day and night modes and 17 brightness steps — readable in full Whitsundays sun or on a 4AM tide change. Metres, feet or fathoms.
Safety, Engineered In
Screen locks itself after 30 seconds. One-touch emergency stop. A user-set docking distance warns and halts retrieval before your anchor meets the bow roller at speed.
NMEA 2000 Native
Broadcasts the standard windlass PGNs straight onto your network — rode status visible on modern MFDs. Up to 256 windlass IDs for multi-station and multi-winch boats.
Fits Your Windlass
Magnet-and-sensor counting works with most vertical, horizontal and drum windlasses on the market — and counts chain, rope, or chain-plus-rope rodes.
Choose Your Setup
One question: where do you want the controls?
Three ways to run i@nchor. Pick the line that sounds like your boat — every setup includes the chain sensor kit.
Not sure? Send us your windlass model, rode and helm photo — we'll pick for you, no charge, same day. Older Raymarine (e/c-series, Element) or other brand of MFD? The display head is your answer; the BlackBox browser control is the fallback.
Three Steps to Instrumented Anchoring
Fit it. Calibrate it. Command it.
01
Mount the Sensor
A magnet in the gypsy and a sensor on the deckplate — many windlasses come pre-drilled for exactly this. Cut a 75 mm hole at the helm for the display, or use the desktop bracket.
02
Tune in Minutes
Set your chain-per-revolution, run the one-shot sensor calibration, set your limits. Standard solenoid wiring — up, down, done.
03
Anchor on Numbers
Manual with live count, auto to a preset, or depth × scope straight off the sounder. The winch stops where you told it to. Every time.
Spares & Accessories
i@nchor Parts
Replacement sensors, extension cables and network cables to extend, maintain or upgrade your i@nchor system.
Forged Here
Australian brains at your bow
TMQ International has been building marine electronics for working boats since 1974 — autopilots trusted by trawlers, ferries and workboats across Australasia. The i@nchor carries that pedigree to your foredeck.
Built in Brisbane
ISO9001 facility, Rivergate Refit Complex
Class Pedigree
Lloyd's Register · Bureau Veritas · ClassNK
Rapid Dispatch
Ships from Melbourne, same-day before 12PM
Local Support
Backed by TMQ Australia & the AMI Group network
Straight Answers
Before you ask
Will it fit my windlass?
Almost certainly. The i@nchor counts via a magnet in the chainwheel and a sensor beneath it — the same proven approach used across the industry, and many windlasses ship pre-drilled for it. Send us your windlass model and we’ll confirm fit before you pay a cent.
Display Head or BlackBox — which do I need?
If you want a dedicated screen at the helm, go Display Head. If you run a Raymarine Axiom or Garmin OneHelm and want to skip a new hole in the dash, go BlackBox. Running two anchors? BlackBox Dual synchronises both from one panel.
Does it handle rope-and-chain rodes?
Yes — chain, rope, or chain-plus-rope, selectable in the menu, with readouts in metres, feet or fathoms.
Do I need to buy the sensor separately?
No — every Display Head and BlackBox setup already includes a chain sensor kit. The standalone sensor in the Parts section above is for replacements or a second install only.
Can I stop it instantly?
One touch of MODE halts the winch mid-run. The screen also locks itself after 30 seconds idle so a knee or an elbow can’t send your anchor down at the dock.
Know exactly what's out.
Dealer-direct i@nchor pricing, confirmed fit for your windlass, same-day answers.
Request a Quote